Illustration for Cloudways pricing: an itemised bill, stacked add-ons and a clock for hourly billing

This article contains affiliate links. AutomateWithMNK may earn a commission if you sign up through certain links, at no additional cost to you. This does not influence our editorial assessment.

Cloudways pricing: the bottom line

Cloudways Flexible starts at $11 a month. That buys the smallest server, Micro (1 GB RAM, 1 vCPU, 25 GB storage), on DigitalOcean’s Basic type with Standard SSD storage. Your real bill then has four parts: the server, metered by the hour; any add-ons you switch on; offsite backup storage; and local tax. Autonomous, the auto-scaling WordPress line, is sold differently: $99, $199 or $399 a month, plus usage-based overages.

All figures are in US dollars, before tax, and were against Cloudways’ official pages. Short-term discounts are left out on purpose: you budget a hosting bill over many months, so only standard rates are useful here.

Visit Cloudways and start the free trial

Not sure Cloudways suits you in the first place? Our Cloudways review covers who it is for and who should skip it.

The DigitalOcean reference grid

These are the first four sizes in the DigitalOcean tab, Basic type, of the pricing page, . Standard means SSD storage and Premium means NVMe storage; at a given size, both have the same RAM, CPU, storage and bandwidth.

Cloudways Flexible — DigitalOcean Basic, Standard (SSD) vs Premium (NVMe), checked October 20, 2026
SizeConfigurationStandard monthlyStandard hourlyPremium monthlyPremium hourly
Micro1 GB RAM, 1 vCPU, 25 GB, 1 TB bandwidth$11$0.0164$14$0.0208
Small2 GB, 1 vCPU, 50 GB, 2 TB$24$0.0357$28$0.0417
Medium4 GB, 2 vCPU, 80 GB, 4 TB$46$0.0685$54$0.0804
Large8 GB, 4 vCPU, 160 GB, 5 TB$88$0.131$99$0.1473

Every size advertises unlimited visits and unlimited websites, so the practical ceiling is the server’s resources. Larger sizes are listed on the same page; check their price and configuration when you choose.

What moves the server price

Four decisions set the server price before any add-on:

  1. Provider. DigitalOcean, Vultr, Linode, AWS and Google Cloud each have their own grid. This guide reproduces DigitalOcean only; for the others, open the provider’s tab on the pricing page. AWS and Google Cloud prices also depend on the region.
  2. Server type. The grid above is DigitalOcean’s Basic type; other types are priced separately.
  3. Standard or Premium. At the same DigitalOcean Basic size, Premium (NVMe) costs more than Standard (SSD): $14 vs $11 a month for Micro, $99 vs $88 for Large.
  4. Size. RAM, CPU, storage and bandwidth grow together from one size to the next, and so does the price.

Node.js applications belong to a different product line, Cloudways Velocity, billed monthly from $20 for the Starter plan (2 GB RAM, 2 vCPU, 5 apps), checked October 21, 2026.

What the server price covers

The server price includes the software stack Cloudways manages for you. Cloudways now promotes its Lightning Stack, built on NGINX and PHP-FPM and available to all users from the dashboard. The Cloudways homepage claims “up to 65% faster load times”, and the launch post says the comparison was run on dynamic workloads against Cloudways’ previous hybrid stack. That is Cloudways’ marketing claim, not something AutomateWithMNK measured. Before switching, note that Lightning supports neither .htaccess files nor Apache modules, and existing sites are not moved over automatically.

The pricing page also lists Redis, Object Cache Pro, staging and cloning, SSL and a first migration as free. They add nothing to the invoice; the add-ons below do.

Hourly rates vs your monthly invoice

Cloudways explains in its monthly vs hourly billing article that running servers accrue charges by the hour and that usage is rolled into a single invoice early the next month. Whether that total is capped depends on the provider:

  • DigitalOcean, Linode, Vultr: a server that runs all month is capped at its monthly price.
  • AWS, Google Cloud: no monthly cap, so the total follows actual hours, and the rate also depends on the region.

For an always-on site, the cap makes a DigitalOcean, Linode or Vultr server easy to forecast. On AWS or Google Cloud, leave headroom in your budget and watch the month-to-date estimate.

Autonomous plans and overages

Autonomous bundles baseline resources into a monthly plan and bills anything beyond them.

Autonomous plans (checked October 20, 2026)
PlanMonthlyBaseline serversBandwidthDiskExtra autoscaling
Growth$991150 GB20 GB$0.07 per server-hour
Scale$1992250 GB50 GB$0.10 per server-hour
Plus$39931,000 GB100 GB$0.12 per server-hour
EnterpriseCustom quote————

Visits are unmetered. Beyond the included amounts, disk costs $1 per GB and bandwidth $0.04 per GB. For a store with spiky traffic, these overage lines can matter as much as the plan price.

Add-ons that raise the total

Add-ons explain most of the gap between the server price and the invoice. Figures from the add-ons section of the pricing page:

Paid add-ons (checked October 20, 2026)
Add-onPriceBilled per
Cloudflare EnterpriseFrom $4.99Domain, per month
Malware ProtectionFrom $4App, per month
Site ManagerFrom $3App, per month
SafeUpdatesFrom $3Month
Rackspace email$1.5 (also shown as “starting at $1”)Mailbox, per month
DNS Made Easy$0.50Domain, per month
Offsite backup storage$0.033GB, per server
Advance Support$100, or 10% of the invoiceMonth

Cloudways publishes two different prices for Rackspace mailboxes. Budget with the higher one and confirm the amount the dashboard shows when you activate it.

Estimate your own bill

A “typical total” would fit nobody’s setup, so here is the worksheet instead. It mirrors how the invoice is built:

Monthly estimate worksheet
LineHow to calculate it
ServerHourly rate × hours running, capped at the monthly price on DigitalOcean, Linode and Vultr
Per-domain add-onsNumber of domains × Cloudflare Enterprise and/or DNS Made Easy price
Per-app add-onsNumber of apps × Malware Protection and/or Site Manager price
EmailNumber of mailboxes × price per mailbox
Offsite backupsGB stored × $0.033, for each server
Advance SupportOnly if you enable it
TaxSet by your billing address, shown as a separate line

Offsite backup volume depends on site size, backup frequency and retention, which makes it the hardest line to predict. Check it after your first invoice and adjust retention if needed.

Billing rules that catch people out

From the billing guide and related help articles:

  1. Add-ons are charged for the full month on activation, however few days you use them.
  2. A stopped server is still billed. Only removing every billable resource stops the charges. Deleting a server or deactivating an add-on mid-month leads to one final invoice the following month.
  3. Resizing a server on or before day 28 is billed hourly on a 672-hour basis; after day 28, or with no resize, the full monthly rate applies, according to the scaling article.
  4. The month-to-date estimate can differ from the final invoice by up to 3%.
  5. Payment order: credits first, then prepaid funds, then your primary payment method, as described in the payment system article.

Keeping the bill under control

The safest savings follow straight from those rules.

  • Delete, don’t stop. Back up and delete test servers you no longer need; stopped servers keep costing money.
  • Time add-on activations. Because an add-on is due for the full month, switching it on late in the month costs the same as on day one.
  • Tune backup retention. Shorter retention means less offsite storage, but keep enough history for the risks you care about.
  • Consolidate small sites. Several apps can share one server, and one well-sized server often costs less than several tiny ones.
  • Pick the provider deliberately. The monthly cap on DigitalOcean, Linode and Vultr protects you from runaway hours; AWS and Google Cloud have none.

Free trial and upgrading

The Flexible trial runs for three days and needs no credit card, which is enough to launch a server, migrate a test site and see which add-ons you would need. To continue, add a valid card in the dashboard; hourly billing starts from there. The Autonomous trial is separate, capped at 20 GB of disk and 150 GB of bandwidth, and ends as soon as either runs out.

Use the trial to write down the hourly and monthly price of the exact configuration you want (provider, type, Standard or Premium, size) as the dashboard shows it.

Start a Cloudways trial and confirm your rates

FAQ

What is the cheapest Cloudways plan?

$11 a month ($0.0164 an hour) for the Micro server (1 GB RAM, 1 vCPU, 25 GB) on DigitalOcean Basic with Standard storage, checked October 20, 2026. Add-ons and tax come on top.

Is Cloudways billed monthly or hourly?

Both. Flexible usage accrues by the hour and is invoiced once a month, early in the following month. Autonomous is sold as monthly plans.

Do Cloudways prices include tax?

No. Tax depends on your billing address and appears as a separate line on the invoice.

Why is my invoice higher than the server price?

Usually because of add-ons (charged for the full month once activated), offsite backup storage, or a stopped server that is still billed.

Is the price the same with every provider?

No. Each provider has its own rates, and AWS and Google Cloud prices vary by region.

How do I stop paying completely?

Remove every billable resource, servers and add-ons alike. A final invoice then covers the usage of the current month.

Sources

Official pages checked on . Rates change; confirm them on the pricing page and in your dashboard before you commit.